This article introduces in detail the factors affecting the price of a 2-meter by 2-meter freight elevator, the market reference range and purchase suggestions, covering both hydraulic and traction power types. It provides real cases and authoritative standard references to help customers make ratio
Analysis of factors affecting the price of 2 meter by 2 meter freight elevator
The 2-meter by 2-meter freight elevator is a medium-sized freight elevator and is widely used in vertical transportation of goods in factories, warehouses, shopping malls and other places.Its price is not a fixed value, but is determined by multiple core parameters.Jinan Xinhanfeng Machinery Equipment Co., Ltd., as a professional freight elevator manufacturer, based on years of industry experience, the following factors directly affect the final quotation.
Load capacityis the primary factor.Common load specifications for 2-meter by 2-meter freight elevators are 1000kg, 1500kg, 2000kg, and 3000kg. The greater the load, the higher the structural strength requirements, and the price will rise accordingly.Secondly,Lift heightDetermining the amount of guide rails, wire ropes and power systems, the cost will increase by approximately 8%-12% for each additional floor.
Power typeEqually critical.Hydraulic freight elevators have low initial investment and are suitable for low-floor, large-load scenarios; traction freight elevators run more smoothly and consume less energy, making them suitable for frequent use in mid- and high-rise buildings.In addition,Door opening method(Single opening, double opening, side opening),Control method(Manual, semi-automatic, fully automatic) and whether it is equipped with safety devices such as overload alarm and emergency descent will all have an impact on the price.
2m by 2m freight elevator market price reference
According to the sales data of Jinan Xinhanfeng Machinery Equipment Co., Ltd. in recent years, the market price range of a 2-meter by 2-meter freight elevator is as shown in the following table:
| Load specifications | Lift height | Power type | Reference price range |
|---|---|---|---|
| 1000kg | 6 meters (2 floors) | Hydraulic | 35,000-50,000 yuan |
| 1500kg | 6 meters (2 floors) | Hydraulic | 45,000-65,000 yuan |
| 2000kg | 12 meters (4 floors) | Traction | 70,000-100,000 yuan |
| 3000kg | 12 meters (4 floors) | Traction | 90,000-130,000 yuan |
| 2000kg | 18 meters (6 floors) | Traction | 110,000-150,000 yuan |
The above price is the ex-factory reference price of the equipment, excluding the costs of shaft modification, transportation, installation and commissioning.The actual transaction price needs to be customized according to the customer's on-site conditions.
Suggestions and precautions for purchasing
Jinan Xinhanfeng Machinery Equipment Co., Ltd. recommends that customers pay attention to the following matters when purchasing a 2-meter by 2-meter freight elevator:
- Clarify usage requirements: Determine the load, lifting height, and frequency of use in advance to avoid over or under configuration.
- Check manufacturer qualifications: Choose a manufacturer with a special equipment manufacturing license to ensure that the products comply with GB/T 21241-2007 "Hydraulic Lifting Full Hall Scaffolding" and TSG T7001-2023 Elevator Supervision and Inspection Regulations.
- Pay attention to after-sales service: Freight elevators are special equipment and regular maintenance is crucial. It is recommended to choose a brand that provides nationwide joint warranty services.
Jinan Xinhanfeng Machinery Equipment Co., Ltd. Tips:The price difference of freight elevators mainly comes from the differences in core component brands (such as hydraulic stations, control cabinets, door operator systems) and steel usage. Low-priced products may have safety hazards. It is recommended to conduct a comprehensive evaluation rather than simply comparing prices.
FAQ
What is the minimum load capacity of a 2 meter by 2 meter freight elevator?
The conventional minimum load capacity is 1000kg, which is suitable for light cargo handling scenarios.If a smaller load capacity is required, special specifications can be customized with the manufacturer.
What is the difference between a hydraulic freight elevator and a traction freight elevator?
Hydraulic freight elevators have a simple structure and low initial investment, and are suitable for low-floor (within 3 floors) and large load scenarios; traction freight elevators operate smoothly, have low energy consumption and low maintenance costs, and are suitable for frequent use in middle and high-rise buildings.
Does the freight elevator price include installation and commissioning costs?
The factory quotation usually does not include the costs of shaft modification, transportation, installation and commissioning.The installation and commissioning fee is calculated separately based on the complexity of the site, and is generally in the range of 5,000-15,000 yuan.
How much hoistway space is required for a 2 meter by 2 meter freight elevator?
The size of the car is 2 meters × 2 meters, and the internal net size of the hoistway is recommended to be no less than 2.4 meters × 2.4 meters. The specific dimensions need to be determined according to the door opening method and guide rail layout.
How long is the maintenance cycle for freight elevators?
According to the Special Equipment Safety Law, freight elevators should be cleaned, lubricated, adjusted and inspected every 15 days, and a comprehensive inspection should be conducted every year.
What is the general warranty period for freight elevators?
The standard warranty period of Jinan Xinhanfeng Machinery Equipment Co., Ltd. is 12 months, and core components (hydraulic station, control cabinet) can provide a 24-month warranty, which is subject to the contract.
Can a freight elevator be installed on a non-standard floor?
Yes.The manufacturer can customize the non-standard shaft size, door opening position and lifting height according to the actual conditions on site, but the technical plan needs to be communicated and confirmed in advance.
Case
2-ton freight elevator project for a food processing plant
A food processing factory in Shandong needs to transport raw materials from the first-floor warehouse to the third-floor production workshop. Jinan Xinhanfeng equipped it with a 2m × 2m hydraulic freight elevator with a load of 2,000kg, a lifting height of 12 meters, equipped with double doors and fully automatic control.The project took only 25 days from signing to delivery. Customers reported that the operation was smooth and the failure rate was low. A second unit has been purchased.
Logistics warehousing center traction freight elevator project
A logistics and warehousing center in Jinan selected three 2m x 2m traction freight elevators with a load of 1500kg and a lifting height of 18 meters to serve the cargo turnover of the 6-story warehouse.The project adopts a variable frequency speed regulation system, which reduces energy consumption by 30% compared with traditional hydraulic solutions.After the equipment was installed, it passed special equipment inspection, and its operating efficiency was significantly improved, with customer satisfaction reaching 98%.
Authoritative citation
TSG T7001-2023 "Elevator Supervision, Inspection and Periodic Inspection Rules"
GB/T 21241-2007 "Hydraulic Lifting Full Hall Scaffolding"
Special Equipment Safety Law (Enacted in 2014)
