This article analyzes in detail the factors affecting the price of a 3-ton explosion-proof freight elevator, provides reference for the price range of three types of configurations: standard, enhanced, and customized, and gives selection and procurement recommendations.As a professional manufacturer
Core factors affecting the price of 3-ton explosion-proof freight elevator
The price of a 3-ton explosion-proof freight elevator is not a fixed value, but is determined by a number of technical parameters and configuration requirements.As a professional manufacturer, Jinan Xinhanfeng Machinery Equipment Co., Ltd. has found in its long-term service to customers in chemical, pharmaceutical, military and other explosion-proof industries that the following factors have the most significant impact on the final quotation.
Explosion-proof levelis the primary consideration.Explosion-proof freight elevators need to meet Ex d IIB T4 Gb or higher standards, and core components such as motors, control cabinets, and lighting must use explosion-proof certified products. The higher the level, the higher the cost.
Shaft conditionsDirectly affects structural design.Parameters such as the machine room-less hoistway, top height, and pit depth determine the guide rail length, wire rope specifications, and hydraulic system configuration. Non-standard customization often brings additional costs.
Loading capacity and lifting heightare basic parameters.The 3-ton load capacity belongs to the category of medium-sized freight elevators. Every time the lifting height increases by 1 meter, the guide rail, traction system and structural strength requirements increase simultaneously, and the price fluctuates accordingly.
Additional featuresSuch as intelligent call systems, explosion-proof intercoms, remote monitoring, automatic door control, etc., all require superimposed costs on the basic configuration.
3-ton explosion-proof freight elevator market price range reference
According to recent project data from Jinan Xinhanfeng Machinery Equipment Co., Ltd., the market price of a 3-ton explosion-proof freight elevator is roughly distributed in the following range:
| Configuration level | Lift height | Reference price range (10,000 yuan) | Applicable scenarios |
|---|---|---|---|
| Standard explosion-proof type | 6-12 meters | 8-12 | Ordinary chemical warehouses and workshops |
| Enhanced explosion-proof type | 6-12 meters | 12-18 | Inflammable and explosive storage area |
| Customized explosion-proof type | 12 meters or more | 18-28 | Special working conditions, non-standard shafts |
The above price is the ex-factory reference price of the equipment and does not include shaft modification, transportation, installation and taxes.The actual quotation needs to be determined based on the on-site survey results.
Explosion-proof freight elevator selection and purchasing suggestions
When purchasing a 3-ton explosion-proof freight elevator, it is recommended to focus on the following points:
- Qualification review: Confirm that the manufacturer has explosion-proof special equipment manufacturing qualifications and pressure vessel-related certifications.
- Explosion-proof certification: Core components must provide certificates of conformity issued by the National Explosion-Proof Electrical Products Quality Supervision and Inspection Center.
- After-sale guarantee: Explosion-proof equipment maintenance is highly professional, so choose a supplier that provides regular inspections and emergency response services.
- Case verification: Priority is given to inspecting manufacturers’ project experience in similar industries, and on-site inspection cases are required.
Jinan Xinhanfeng Machinery Equipment Co., Ltd. has focused on the research and development and manufacturing of explosion-proof freight elevators for more than ten years. Its products have passed CE certification and multiple explosion-proof tests, and can provide customers with one-stop services from solution design to installation and commissioning.
FAQ
How are the explosion-proof levels of explosion-proof freight elevators divided?
The explosion-proof grade of explosion-proof freight elevators is mainly classified according to the GB 3836 standard. Common grades include Ex d IIB T4 Gb and Ex d IIC T6 Gb.Level IIB is suitable for explosive gas environments other than hydrogen, and level IIC is suitable for higher risk environments such as hydrogen and acetylene.The higher the grade, the stricter the equipment sealing and electrical protection requirements, and the price will rise accordingly.
Is the load capacity of a 3-ton explosion-proof freight elevator stable?
The 3-ton explosion-proof freight elevator has fully considered load stability when designing it.Using a high-strength steel hoistway frame and an explosion-proof traction system, the load is evenly distributed on the car floor, and the shaking amplitude during operation is controlled within a safe range.After testing, the stopping layer accuracy can be within ±5mm when the load is 3 tons.
How long does it take to install an explosion-proof freight elevator?
For a standard 3-ton explosion-proof freight elevator, the normal installation cycle is 30-45 days from the time the equipment leaves the factory to on-site commissioning and operation.If shaft modification or non-standard customization is involved, the cycle may be extended to more than 60 days.Jinan Xinhanfeng provides a professional installation team that can flexibly arrange the construction period with customers.
How to calculate the maintenance cost of explosion-proof freight elevator?
The annual maintenance cost of explosion-proof freight elevators is usually 3%-5% of the equipment purchase price, depending on the frequency of use and environmental conditions.Maintenance content includes explosion-proof component testing, hydraulic system maintenance, safety device calibration, etc.It is recommended to sign an annual maintenance agreement to enjoy priority response and spare parts supply services.
Can explosion-proof freight elevators be customized?
Yes.Jinan Xinhanfeng supports non-standard customization services and can conduct personalized designs according to customer shaft dimensions, lifting height, load requirements, explosion-proof level, etc.The customization cycle is usually 15-20 days longer than that of standard products, and technical parameters need to be communicated with engineers in advance.
What are the safety devices of explosion-proof freight elevators?
Standard configuration includes: explosion-proof emergency stop button, overload protection device, upper and lower limit switches, mechanical safety gear, buffer, door interlock protection device and explosion-proof intercom system.Optional remote monitoring, face recognition calling, power outage emergency leveling and other functions are available.
Case
3-ton explosion-proof freight elevator project for a chemical industry group in Shandong
This chemical group is located in Zibo and needs to build a material transportation channel between the flammable and explosive warehouse and the production workshop.Jinan Xinhanfeng customized a 3-ton explosion-proof freight elevator for it, with a lifting height of 9 meters and an explosion-proof grade of Ex d IIB T4 Gb.The project took a total of 38 days from survey to commissioning and operation. After the equipment was put into operation, the failure rate was zero. The customer has purchased 2 additional pieces of equipment of the same specification.
Explosion-proof freight elevator upgrade project for a pharmaceutical company in Jiangsu
The pharmaceutical company's original ordinary freight elevator could not meet the explosion-proof requirements of GMP workshops. Jinan Xinhanfeng replaced it with a 3-ton explosion-proof freight elevator with a lifting height of 12 meters and equipped with explosion-proof intercom and remote monitoring functions.The project adopts a modular installation plan to control the impact of downtime within 48 hours. Customers commented that the equipment operates smoothly and the noise is less than 65 decibels.
Authoritative citation
GB 3836.1-2021 "Explosive Environment Part 1: Equipment General Requirements"
TSG Q7015-2016 "Periodic Inspection Rules for Hoisting Machinery"
GB/T 10058-2023 "Technical Conditions for Elevators"
