This article introduces in detail the market price range of 2-ton three-story freight elevators (80,000 to 150,000 yuan), analyzes the main factors that affect the price, including driving method, number of landing doors, door opening methods, hoistway conditions, etc., and provides a price comparis
Price overview of 2-ton freight elevator three floors
The price of the third floor of a 2-ton freight elevator varies depending on the brand, configuration and installation environment. The market quotation range is usually between80,000 to 150,000 yuanbetween.As a professional freight elevator manufacturer, Jinan Xinhanfeng Machinery Equipment Co., Ltd. provides a variety of configuration solutions for three-story, 2-ton load freight elevators to meet the cargo transportation needs of different factories, warehouses, and shopping malls.Generally speaking, the price of a basic configuration freight elevator is 80,000 to 100,000 yuan, the standard configuration is 100,000 to 120,000 yuan, and the high-end configuration can reach 120,000 to 150,000 yuan.
The price of a freight elevator is not fixed, and the actual quotation needs to be accurately calculated based on specific parameters such as shaft dimensions, landing settings, door opening methods, and drive types.It is recommended that customers provide detailed installation site information before purchasing in order to obtain an accurate quotation.
Main factors affecting price
Freight elevator prices are affected by many factors, and understanding these factors can help customers make more informed purchasing decisions.
- Drive mode:The price of hydraulic freight elevators is relatively low, while the price of traction freight elevators is slightly higher because they run more smoothly and are energy-saving.
- Number of landing doors:The price of a three-story freight elevator increases by about 15,000 to 20,000 yuan compared to a two-story one, and each additional floor adds about 10,000 to 15,000 yuan.
- Opening method:The price of center-opening doors is lower than that of side-opening doors, and automatic doors are about 3,000 to 5,000 yuan more expensive than manual doors.
- Shaft condition:There are already concrete shafts that meet the standards, which can reduce installation costs, while steel structure shafts require additional investment.
- Brand configuration:Imported brand traction machines, control cabinets and other core components will increase the overall price, while domestic high-quality components are more cost-effective.
Three-story 2-ton freight elevator configuration comparison
| Configuration type | Drive mode | load | speed | reference price |
|---|---|---|---|---|
| Economical | Hydraulic | 2000kg | 0.5m/s | 80,000-100,000 yuan |
| Standard type | Traction | 2000kg | 1.0m/s | 100,000-120,000 yuan |
| High-end | Traction | 2000kg | 1.5m/s | 120,000-150,000 yuan |
Warm reminder:The above prices are market reference ranges, and specific quotations need to be determined based on the actual situation of the customer's site.Jinan Xinhanfeng Machinery Equipment Co., Ltd. provides free on-site survey and quotation services. Welcome to call us for consultation.
Shopping advice
When purchasing a 2-ton three-story freight elevator, it is recommended to give priority to the following points: first, choose a qualified and regular manufacturer to ensure that the product meets national safety standards; second, pay attention to the after-sales service system, including installation and commissioning, regular maintenance, fault response, etc.; third, comprehensively consider the frequency of use and load requirements, select the most suitable configuration solution, and avoid waste caused by over-configuration or insufficient configuration that affects use.
FAQ
How long does it take to install a 2-ton freight elevator on the third floor?
Under normal circumstances, a 2-ton three-story freight elevator takes about 30 to 45 working days from contract signing to completion of installation and commissioning. The specific period depends on the hoistway preparation and equipment configuration.
What is the difference between a hydraulic freight elevator and a traction freight elevator?
Hydraulic freight elevators are low-priced and simple to maintain, but their operation speed is slow and their energy consumption is high. Traction freight elevators operate smoothly, are fast and energy-saving, but their initial investment is slightly higher.For three-story freight elevators, it is recommended to give priority to the traction type.
What are the requirements for the hoistway when installing a freight elevator?
The dimensions of the standard 2-ton three-story freight elevator shaft are recommended to be no less than 2000mm × 2000mm, the height of the top floor is no less than 4500mm, and the depth of the pit is no less than 1500mm.The specific dimensions need to be adjusted according to the device model.
How long is the warranty period for a freight elevator?
The freight elevator provided by Jinan Xinhanfeng Machinery Equipment Co., Ltd. has a one-year warranty for the entire machine and a two-year warranty for the core components. It provides lifetime technical support and spare parts supply.
How much does it cost to operate a freight elevator?
A 2-ton three-story freight elevator operates about 20 to 30 times a day on average, and the average monthly electricity bill is about 200 to 400 yuan, depending on the frequency of use and electricity price standards.
Does the freight elevator require regular maintenance?
Needed.According to special equipment safety regulations, freight elevators should be maintained every 15 days and undergo a comprehensive annual inspection to ensure safe operation.
Case
2-ton three-story freight elevator project in a logistics warehouse in Jinan
The logistics warehouse is located in Licheng District, Jinan City. It needs to install a 2-ton three-story freight elevator for up and down transportation of goods.The customer chose the standard traction freight elevator from Jinan Xinhanfeng Machinery Equipment Co., Ltd., which is configured with a speed of 1.0m/s and a center-opening automatic door.The project took only 35 days from survey to delivery. The equipment operates stably and customer satisfaction is high.
Renovation project of 2-ton three-story freight elevator in a Weifang factory
A machinery manufacturing factory in Weifang had an old freight elevator that frequently broke down and decided to replace it with new equipment.Jinan Xinhanfeng designed a 2-ton three-story hydraulic freight elevator for it. The budget was controlled within 90,000 yuan. During the construction period, it did not affect the normal production of the factory. After the transformation, the operation was smooth and the failure rate was greatly reduced.
Authoritative citation
"Technical Conditions for Elevators" (GB/T 10058-2009)
"Safety Code for Elevator Manufacturing and Installation" (GB 7588-2003)
"Special Equipment Safety Supervision Regulations"
